Safety-Catch Linkers for Solid-Phase Peptide Synthesis.

Solid-phase peptide synthesis (SPPS) is the preferred strategy for synthesizing most peptides for research purposes and on a multi-kilogram scale. One key to the success of SPPS is the continual evolution and improvement of the original method proposed by Merrifield. Over the years, this approach has been enhanced with the introduction of new solid supports, protecting groups for amino acids, coupling reagents, and other tools. One of these improvements is the use of the so-called "safety-catch" linkers/resins. The linker is understood as the moiety that links the peptide to the solid support and protects the C-terminal carboxylic group. The "safety-catch" concept relies on linkers that are totally stable under the conditions needed for both α-amino and side-chain deprotection that, at the end of synthesis, can be made labile to one of those conditions by a simple chemical reaction (e.g., an alkylation). This unique characteristic enables the simultaneous use of two primary protecting strategies: tert-butoxycarbonyl (Boc) and fluorenylmethoxycarbonyl (Fmoc). Ultimately, at the end of synthesis, either acids (which are incompatible with Boc) or bases (which are incompatible with Fmoc) can be employed to cleave the peptide from the resin. This review focuses on the most significant "safety-catch" linkers.

Loading Determination of DMTr-substituted Resins for Large-scale Oligonucleotide Synthesis.

The loading (i.e., substitution) of solid supports for oligonucleotide synthesis is an important parameter in large-scale manufacturing of oligonucleotides. Several key process parameters are dependent on the substitution of the solid support, including the number of phosphoramidite nucleoside equivalents used in the coupling step. For dimethoxytrityl (DMTr)-loaded solid supports, the substitution of the resin is determined by quantitatively cleaving the DMTr protecting group from the resin under acidic conditions and then analyzing the DMTr cation extinction by UV/vis spectroscopy. The spectrometric measurement can be performed at 409 nm or the global extinction maximum of 510 nm. The substitution is then calculated based on the Lambert-Beer law analogously to the substitution determination of Fmoc-substituted resins. Below, the determination of the molar extinction coefficient at 510 nm in a solution of 10% dichloroacetic acid in toluene and subsequent determination of the DMTr loading of DMTr-substituted resins is reported. © 2024 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Determination of the molar extinction coefficient at 510 nm in DCA Deblock solution Basic Protocol 2: Substitution determination of DMTr-substituted resins by cleavage of the DMTr cation.

Process Mass Intensity (PMI): A Holistic Analysis of Current Peptide Manufacturing Processes Informs Sustainability in Peptide Synthesis.

Small molecule therapeutics represent the majority of the FDA-approved drugs. Yet, many attractive targets are poorly tractable by small molecules, generating a need for new therapeutic modalities. Due to their biocompatibility profile and structural versatility, peptide-based therapeutics are a possible solution. Additionally, in the past two decades, advances in peptide design, delivery, formulation, and devices have occurred, making therapeutic peptides an attractive modality. However, peptide manufacturing is often limited to solid-phase peptide synthesis (SPPS), liquid phase peptide synthesis (LPPS), and to a lesser extent hybrid SPPS/LPPS, with SPPS emerging as a predominant platform technology for peptide synthesis. SPPS involves the use of excess solvents and reagents which negatively impact the environment, thus highlighting the need for newer technologies to reduce the environmental footprint. Herein, fourteen American Chemical Society Green Chemistry Institute Pharmaceutical Roundtable (ACS GCIPR) member companies with peptide-based therapeutics in their portfolio have compiled Process Mass Intensity (PMI) metrics to help inform the sustainability efforts in peptide synthesis. This includes PMI assessment on 40 synthetic peptide processes at various development stages in pharma, classified according to the development phase. This is the most comprehensive assessment of synthetic peptide environmental metrics to date. The synthetic peptide manufacturing process was divided into stages (synthesis, purification, isolation) to determine their respective PMI. On average, solid-phase peptide synthesis (SPPS) (PMI ≈ 13,000) does not compare favorably with other modalities such as small molecules (PMI median 168-308) and biopharmaceuticals (PMI ≈ 8300). Thus, the high PMI for peptide synthesis warrants more environmentally friendly processes in peptide manufacturing.

Inverse Peptide Synthesis Using Transient Protected Amino Acids.

Peptide therapeutics have experienced a rapid resurgence over the past three decades. While a few peptide drugs are biologically produced, most are manufactured via chemical synthesis. The cycle of prior protection of the amino group of an α-amino acid, activation of its carboxyl group, aminolysis with the free amino group of a growing peptide chain, and deprotection of the N-terminus constitutes the principle of conventional C → N peptide chemical synthesis. The mandatory use of the Nα-protecting group invokes two additional operations for incorporating each amino acid, resulting in poor step- and atom-economy. The burgeoning demand in the peptide therapeutic market necessitates cost-effective and environmentally friendly peptide manufacturing strategies. Inverse peptide chemical synthesis using unprotected amino acids has been proposed as an ideal and appealing strategy. However, it has remained unsuccessful for over 60 years due to severe racemization/epimerization during N → C peptide chain elongation. Herein, this challenge has been successfully addressed by ynamide coupling reagent employing a transient protection strategy. The activation, transient protection, aminolysis, and in situ deprotection were performed in one pot, thus offering a practical peptide chemical synthesis strategy formally using unprotected amino acids as the starting material. Its robustness was exemplified by syntheses of peptide active pharmaceutical ingredients. It is also amenable to fragment condensation and inverse solid-phase peptide synthesis. The compatibility to green solvents further enhances its application potential in large-scale peptide production. This study offered a cost-effective, operational convenient, and environmentally benign approach to peptides.

Solid-phase peptide synthesis in 384-well plates.

Newer solid-phase peptide synthesis and release strategies enable the production of short peptides with high purity, allowing direct screening for desired bioactivity without prior chromatographic purification. However, the maximum number of peptides that can currently be synthesized per microplate reactor is 96, allowing the parallel synthesis of 384 peptides in modern devices that have space for 4 microplate reactors. To synthesize larger numbers of peptides, we modified a commercially available peptide synthesizer to enable the production of peptides in 384-well plates, which allows the synthesis of 1,536 peptides in one run (4 × 384 peptides). We report new hardware components and customized software that allowed for the synthesis of 1,536 short peptides in good quantity (average > 0.5 µmol), at high concentration (average > 10 mM), and decent purity without purification (average > 80%). The high-throughput peptide synthesis, which we developed with peptide drug development in mind, may be widely used for peptide library synthesis and screening, antibody epitope scanning, epitope mimetic development, or protease/kinase substrate screening.

Solid-Phase Synthesis and Biological Evaluation of Peptides ADP-Ribosylated at Histidine.

The transfer of an adenosine diphosphate (ADP) ribose moiety to a nucleophilic side chain by consumption of nicotinamide adenine dinucleotide is referred to as ADP-ribosylation, which allows for the spatiotemporal regulation of vital processes such as apoptosis and DNA repair. Recent mass-spectrometry based analyses of the "ADP-ribosylome" have identified histidine as ADP-ribose acceptor site. In order to study this modification, a fully synthetic strategy towards α-configured N(τ)- and N(π)-ADP-ribosylated histidine-containing peptides has been developed. Ribofuranosylated histidine building blocks were obtained via Mukaiyama-type glycosylation and the building blocks were integrated into an ADP-ribosylome derived peptide sequence using fluorenylmethyloxycarbonyl (Fmoc)-based solid-phase peptide synthesis. On-resin installation of the ADP moiety was achieved using phosphoramidite chemistry, and global deprotection provided the desired ADP-ribosylated oligopeptides. The stability under various chemical conditions and resistance against (ADP-ribosyl) hydrolase-mediated degradation has been investigated to reveal that the constructs are stable under various chemical conditions and non-degradable by any of the known ADP-ribosylhydrolases.

2-Pyridone Formation: An Efficient Method for the Solid-Phase Synthesis of Homodimers.

This study presents an efficient method for on-resin dimer generation through self-condensation of 3,3-dimethoxypropionic acid-modified molecules, resulting in 2-pyridones. The approach demonstrated remarkable versatility by producing homodimers of peptides, peptoids, and non-peptidic ligands. Its ease of application, broad utility, and mild reaction conditions not only hold significance for peptide and peptoid research but also offer potential for the on-resin development of a wide range of bivalent ligands.

Morpholine, a strong contender for Fmoc removal in solid-phase peptide synthesis.

Morpholine, which scores 7.5 in terms of greenness and is not a regulated substance, could be considered a strong contender for Fmoc removal in solid-phase peptide synthesis (SPPS). Morpholine in dimethylformamide (DMF) (50%-60%) efficiently removes Fmoc in SPPS, minimizes the formation of diketopiperazine, and almost avoids the aspartimide formation. As a proof of concept, somatostatin has been synthesized using 50% morpholine in DMF with the same purity as when using 20% piperidine-DMF.

Modular synthetic strategy for N/C-terminal protected amyloidogenic peptides.

N/C-terminal protected amyloidogenic peptides are valuable biomaterials. Optimization of the protective structures at both termini is, however, synthetically laborious because a linear sequence of solid-phase peptide synthesis protocol (on-resin peptide assembly/peptide removal from resin/high-performance liquid chromatography purification) is required for the peptides each time the protective group is modified. In this study, we demonstrate a modular synthetic strategy for the purpose of rapidly deriving the N/C-terminal structures of amyloidogenic peptides. The precursor sequences that can be easily synthesized due to a non-amyloidogenic property were stocked as the synthetic intermediates. Condensation of the intermediates with N/C-terminal units in a liquid phase followed by high-performance liquid chromatography purification gave the desired peptides P1-P8. The amyloidogenic peptides that have various N/C-terminal protective structures were therefore synthesized in a labor-effective manner. This method is suggested to be useful for synthesizing amyloidogenic peptides possessing divergent protective structures at the N/C-terminus.

Solid-Phase Synthesis of Caged Luminescent Peptides via Side Chain Anchoring.

The synthesis of caged luminescent peptide substrates remains challenging, especially when libraries of the substrates are required. Most currently available synthetic methods rely on a solution-phase approach, which is less suited for parallel synthesis purposes. We herein present a solid-phase peptide synthesis (SPPS) method for the synthesis of caged aminoluciferin peptides via side chain anchoring of the P1 residue. After the synthesis of a preliminary test library consisting of 40 compounds, the synthetic method was validated and optimized for up to >100 g of resin. Subsequently, two separate larger peptide libraries were synthesized either having a P1 = lysine or arginine residue containing in total 719 novel peptide substrates. The use of a more stable caged nitrile precursor instead of caged aminoluciferin rendered our parallel synthetic approach completely suitable for SPPS and serine protease profiling was demonstrated using late-stage aminoluciferin generation.

A novel synthetic method for backbone-cyclized polypeptide POL7080 with the help of hydrophobic-support materials.

Murepavadin (POL7080) in phase III clinical trials, a backbone-cyclized polypeptide composed of 14 amino acids, has a novel mode of action and shows a specific and efficient bactericidal effect against multidrug-resistant Pseudomonas aeruginosa. It is a potential candidate to treat severe P. aeruginosa infections in the future and still has significant commercial value for further research and development. In this paper, we report a liquid-phase peptide synthetic route for this valuable candidate polypeptide assisted by hydrophobic-support materials (tags), which overcomes the difficulties of high cost and poor yield in the traditional solid-phase synthesis of macrocyclic peptides. Through the careful optimization of reaction conditions and the innovative strategy of synthetic post-treatment, we established a simple and efficient liquid-phase synthetic route suitable for POL7080 and other similar structures, with satisfactory yield, high purity and a production process not being controlled by scale.

Synthesis of Novel Arginine Building Blocks with Increased Lipophilicity Compatible with Solid-Phase Peptide Synthesis.

Arginine, due to the guanidine moiety, increases peptides' hydrophilicity and enables interactions with charged molecules, but at the same time, its presence in a peptide chain might reduce its permeability through biological membranes. This might be resolved by temporary coverage of the peptide charge by lipophilic, enzyme-sensitive alkoxycarbonyl groups. Unfortunately, such a modification of a guanidine moiety has not been reported to date and turned out to be challenging. Here, we present a new, optimized strategy to obtain arginine building blocks with increased lipophilicity that were successfully utilized in the solid-phase peptide synthesis of novel arginine vasopressin prodrugs.

Total wash elimination for solid phase peptide synthesis.

We present a process for solid phase peptide synthesis (SPPS) that completely eliminates all solvent intensive washing steps during each amino acid addition cycle. A key breakthrough is the removal of a volatile Fmoc deprotection base through bulk evaporation at elevated temperature while preventing condensation on the vessel surfaces with a directed headspace gas flushing. This process was demonstrated at both research and production scales without any impact on product quality and when applied to a variety of challenging sequences (up to 89 amino acids in length). The overall result is an extremely fast, high purity, scalable process with a massive waste reduction (up to 95%) while only requiring 10-15% of the standard amount of base used. This transformation of SPPS represents a step-change in peptide manufacturing process efficiency, and should encourage expanded access to peptide-based therapeutics.

Label-Free Imaging of Solid-Phase Peptide Synthesis Products and Their Modifications Tethered in Microspots Using Time-of-Flight Secondary Ion Mass Spectrometry.

Time-of-flight secondary ion mass spectrometry is used to analyze solid-phase synthesis products in 60 µm spots of high-density peptide arrays. As a result, a table of specific fragments for the individual detection of amino acids and their side chain protecting groups within peptides is compiled. The specific signal of an amino acid increases linearly as its number increases in the immobilized peptide. Mass-to-charge ratio values are identified that can distinguish between isomers such as leucine and isoleucine. The accessibility of the N-terminus of polyalanine will be studied depending on the number of its residues. The examples provided in the study demonstrate the significant potential of time-of-flight secondary ion mass spectrometry for high-throughput screening of functional groups and their accessibility to chemical reactions occurring simultaneously in hundreds of thousands of microreactors on a single microscope slide.

Side-Selective Solid-Phase Metallaphotoredox N(in)-Arylation of Peptides.

Postsynthetic diversification of peptides through selective modification of endogenous amino acid side chains has enabled significant advances in peptide drug discovery while expanding the biological and medical chemistry space. However, current tools have been focused on the modification of reactive polar and ionizable side chains, whereas the decoration of aromatic systems (e.g., the N(in) of the tryptophan) has been a long-standing challenge. Here, we introduce metallaphotocatalysis in solid-phase peptide synthesis for the on-resin orthogonal N-arylation of relevant tryptophan-containing peptides. The protocol allows the chemoselective introduction of a new C(sp2)-N bond at the N(in) of tryptophan in biologically active protected peptide sequences in the presence of native redox-sensitive side chains. The fusion of metallaphotocatalysis with solid-phase peptide synthesis opens new perspectives in diversifying native amino acid side chains.

A Convenient Method for the Synthesis of 2'-O-Cyanoethylated Nucleotides and Their Application in the Solid-Phase Synthesis of Related RNA Analogs.

Although small interfering RNA (siRNA) is a key player among gene inhibition therapeutics, there are many obstacles to the development of siRNA drugs due to inherent properties of oligonucleotides, including the unsatisfactory stability of unmodified siRNA, poor pharmacokinetic distribution, and the toxicity induced by off-target effects. To maximize treatment potency, chemical modification of siRNA has undoubtedly been the most successful strategy by far. Widely applied modifications include phosphorothioate linkages, 2'-O-methyl modifications, and 2'-fluoro modifications, among others. To extend the family of chemical modifications for oligonucleotides, 2'-O-cyanoethylated RNA analogs were developed through the replacement of the 2'-hydroxyl group with a 2'-O-cyanoethyl group (-OCH2 CH2 CN). This modification can provide several advantages over unmodified RNA, such as increased stability, improved binding affinity to complementary DNA or RNA strands, and resistance to degradation by cellular nucleases. The 2'-O-cyanoethyl-modified RNAs not only are applied in RNA silencing machinery but also act as research tools for studying RNA structure and function or for developing RNA-based diagnostics. Therefore, the efficient synthesis, deprotection, purification, and characterization of 2'-O-cyanoethylated RNAs deserves more attention. This protocol describes the chemical synthesis of 2'-O-cyanoethylated nucleotides and the solid-phase synthesis, deprotection, and purification of 2'-O-cyanoethylated RNAs. © 2023 Wiley Periodicals LLC. Basic Protocol 1: Preparation of 6-N-dimethylformamidyl-5'-O-dimethoxytrityl-2'-O-cyanoethyl adenosine 3'-(2-cyanoethyl N,N-diisopropyl)phosphoramidite Basic Protocol 2: Preparation of 4-N-acetyl-5'-O-dimethoxytrityl-2'-O-cyanoethyl cytidine 3'-(2-cyanoethyl N,N-diisopropyl)phosphoramidite Basic Protocol 3: Preparation of 2-N-dimethylformamidyl-5'-O-dimethoxytrityl-2'-O-cyanoethyl guanine 3'-(2-cyanoethyl N,N-diisopropyl)phosphoramidite Basic Protocol 4: Preparation of 5'-O-dimethoxytrityl-2'-O-2-cyanoethyl uridine 3'-(2-cyanoethyl N,N-diisopropyl)phosphoramidite Basic Protocol 5: Solid-phase synthesis of 2'-O-cyanoethylated RNA analogs Basic Protocol 6: Deprotection and purification of synthesized 2'-O-cyanoethyl-RNAs.

4-Iodine N-Methylpyridinium-Mediated Peptide Synthesis.

Through systematic optimization of halopyridinium compounds, we established a peptide coupling protocol utilizing 4-iodine N-methylpyridinium (4IMP) for solid-phase peptide synthesis (SPPS). The 4IMP coupling reagent is easily prepared, bench stable, and cost-effective. Employing 4IMP in the SPPS process has showcased remarkable chemoselectivity and efficiency, effectively eliminating racemization and epimerization. This achievement has been substantiated through the successful synthesis of a range of peptides via the direct utilization of commercially available amino acid substrates for SPPS.

Convenient route to Fmoc-homotyrosine via metallaphotoredox catalysis and its use in the total synthesis of anabaenopeptin cyclic peptides.

Herein, we report the first solid-phase total synthesis of the natural cyclic peptide anabaenopeptin F and the use of metallaphotoredox catalysis to overcome the key challenges associated with the preparation of the non-proteinogenic amino acid homotyrosine contained in these peptides. Starting from L-homoserine, enantiopure Fmoc-protected homotyrosine was prepared in a straightforward manner by metallaphotoredox catalysis with N-Fmoc-(S)-2-amino-4-bromobutanoic acid and 4-tert-butoxybromobenzene partners. The prepared protected amino acid was used in solid-phase peptide synthesis to achieve the total synthesis of anabaenopeptin F and establish the stereochemistry of the isoleucine residue. Protease inhibition studies with the synthesized anabaenopeptin F showed inhibitory activities against carboxypeptidase B in the low nanomolar range. The high convergency of the synthetic methodologies paves the way for the rapid access to N-Fmoc-protected non-proteinogenic and unnatural amino acids and the total synthesis of complex bioactive peptides containing these amino acids.

Quantitative and Nondestructive Colorimetric Amine Detection Method for the Solid-Phase Peptide Synthesis as an Alternative to the Kaiser Test.

Solid-phase peptide synthesis (SPPS) is an essential technique for the synthesis of peptide. For half a century, many amine detection methods have been developed to monitor coupling reactions during SPPS. Despite such efforts, to the best of our knowledge, a nondestructive and quantitative colorimetric method has not been developed. Here, we developed the first quantitative and nondestructive colorimetric amine detection method based on an acid-base reaction between HCl salt of electron donor-acceptor type dyes and amino groups on the resin. In this method, a noncolored solution of HCl salt consisting of dyes, whose pKBH+ value was carefully tuned, was deprotonated by amines, allowing the appearance of a yellow color. A good linear relationship (R2 = 0.999) between the absorption of the colored solution and the amine group quantities was confirmed. For all tested proteinogenic and nonproteinogenic amino acids, we achieved quantitative colorimetric analysis with a small relative standard deviation (RSD < 3.6%). Furthermore, during the practical synthesis of an octapeptide containing undetectable amino acids with the Kaiser test, our amine detection allowed for detailed monitoring of the coupling reaction, resulting in a significantly purer peptide in the crude form than that obtained using the Kaiser test.

N,O-Benzylidene Acetal Dipeptides (NBDs) Enable the Synthesis of Difficult Peptides via a Kinked Backbone Strategy.

Proteins with highly hydrophobic regions or aggregation-prone sequences are typically difficult targets for chemical synthesis at the current stage, as obtaining such type of peptides via solid-phase peptide synthesis requires sophisticated operations. Herein, we report N,O-benzylidene acetal dipeptides (NBDs) as robust and effective building blocks to allow the direct synthesis of difficult peptides and proteins via a kinked backbone strategy. The effectiveness and easy accessibility of NBDs have been well demonstrated in our chemical syntheses of various challenging peptides and proteins, including chemokine, therapeutic hormones, histone, and glycosylated erythropoietin.